Exam Bulletin - Stationary Engineer

State of California

Exam Code: EX-2102

Examination Plans Included:

  • STATIONARY ENGINEER - Open

Final Filing Date: Applications are accepted on a continuous basis.

Classification Details

STATIONARY ENGINEER: $5,911.00 - $7,913.00 per Month
STATIONARY ENGINEER: $34.10 - $45.65 per Hour

View the STATIONARY ENGINEER classification specification.

Application Instructions

Applications are accepted on a continuous basis.

Who Should Apply:

The information below will help you determine which classification(s) is(are) appropriate for you. Applicants must meet the Minimum Qualifications as stated on this bulletin to compete in this examination.

Open and Open, Non-Promotional Examination(s):

  • STATIONARY ENGINEER - Open

For all Classifications, once you have participated in any of the following examinations, you may not recompete for 12 months:

Exam Code(s):

    2102

For STATIONARY ENGINEER, once you have participated in any of the following examinations, you may not recompete for 12 months:

Exam Code(s):

  • EX-02102

How To Apply:

Submit an Examination/Employment Application (STD 678) to apply for this examination.

Electronic applications can be submitted through your account at www.CalCareers.ca.gov.

Special Testing Arrangements:

If you require assistance or alternative testing arrangements due to a disability, indicate on your application that you need reasonable accommodation. You will be contacted by a representative of the testing department to make the necessary arrangements. If you have not been contacted by the time you receive notification of testing, please contact the testing department listed in the Contact section of this bulletin.

If you are unable to submit your application or complete the test due to a disability, please contact the testing department listed in the Contact section of this bulletin.

Minimum Qualifications

All applicants must meet the education and/or experience requirements as stated on this exam bulletin to be accepted to the examination.

Unless otherwise stated in the Minimum Qualifications, qualifying experience may be combined on a proportionate basis if the requirements stated below include more than one pattern and are distinguished as "Either" 1, "or" 2, "or" 3, etc. For example, applicants possessing qualifying experience amounting to 50% of the required time of Pattern 1 and additional experience amounting to 50% of the required time of Pattern 2 may be accepted to an examination as meeting 100% of the overall experience requirement.

00106712 - STATIONARY ENGINEER

Either 1

Completion of A Recognized Apprenticeship for Stationary Engineers. (Apprentices who are within six months of completing their apprenticeship program may be admitted to the examination, but must present evidence of completion prior to appointment.)

 

Or 2

Experience: Four years of experience performing duties which included the operation, maintenance and repair of boiler, heating, refrigeration, ventilation and power equipment of large commercial, industrial or institutional buildings including the operation and maintenance of air conditioning systems involving the use of automatic controls. and

 

Education: Completion of 700 hours of formalized technical instruction relating to Stationary Engineering in training offered by such established programs as: Job Corps; Skill Centers; ROP; Trades Schools; Military; and JTPA (Joint Training Partnership Act). (An Associate of Arts or Certificate in Mechanical Electrical Technology, which must have included at least 12 semester units of instruction in heating, ventilation, and refrigeration systems involving the use of automatic controls may be substituted for the 700 hours of technical instruction). Students who are within six months of completing their degree will be admitted to the months of completing their degree will be admitted to the examination but they must present evidence of completion prior to appointment.

 

 

Two years of additional qualifying experience may be substituted for the required education.

 

Position Description

00106712 - STATIONARY ENGINEER

Operates, maintains, and repairs boilers, heaters, pumps, valves, apprentices, and lines used in the distribution of steam and heated or processed water; operates, repairs and maintains refrigerant compressors, condensers, evaporators, traps, transfer pumps, expansion valves, stop valves, and float valves, together with all refrigerant lines and devices used to control temperatures; operates, maintains and repairs air compressors, together with distribution lines and all valves and devices for air control; operates, maintains and repairs all natural and manufactured gas distribution lines, and manufacturing systems including all valves and control devices; operates, repairs and maintains water filters, softeners, piping and pumps used in conjunction with water distribution, including all sinks and toilet bowls, supply lines and water lines; operates, repairs and maintains all types of motors and engines used to power pumps, compressors and fans; repairs and maintains single-phase and multi-phase electrical circuits up to 550 volts; repairs and maintains electrical transformers, motors, controls, machinery fixtures, appliances and elevators; repairs and maintains electronic systems such as clocks, closed circuit television, automatic alarm systems, security systems, energy management systems, equal potential grounding and automatic power transfers; calibrates control systems for air conditioning, refrigeration, heating and ventilation systems, including air balance, humidistat and solid state electronic motor control amplifiers; operates, maintains and repairs water and sewage systems, laundry, bakery and culinary equipment; inspects and trouble shoots electrical and mechanical systems and equipment to identify repairs needed; performs minor building maintenance and repair; plans layouts and estimates costs of electrical, mechanical, and electronic systems; requisitions parts, supplies and equipment; calculates systems requirements to provide estimates for modification or replacement of systems; leads and trains subordinate and less senior personnel, and advises them of unusual problems, procedures, and practices.

For information regarding position location(s), please refer to the Eligible List Information section.

Examination Information

We recommend using Chrome, Firefox, or Edge for optimal performance when accessing the application and examination.

Note: This is a 120 minute timed examination. There is no way to pause, stop, or reset the timer once you start. A stable internet connection is recommended as no additional time will be provided for internet loss, power loss, or computer/browser issues. If you are unable to complete the timed examination, it is recommended you do not continue until you are able to do so.

This examination consists of the following component(s):

Component OrderComponent TypeComponent DuePercentage of Final Score
1CalHR Online ExamN/A100%

A final score of 70% must be attained to be placed on the eligible list.

The written test is designed to evaluate a candidate’s knowledge in the areas of:
  1. Mathematics
  2. Stationary Engineer Knowledge
This examination will also allow for the use of calculators.

In addition to evaluating the applicant's relative knowledge, skill and ability as demonstrated by quality and breadth of education/experience, emphasis in each test component will be on measuring competitively, relative to job demands, each applicant's:

Knowledge of:

  1. Boilers and auxiliary boiler room equipment.
  2. Heating, lighting, ventilating, air conditioning, power, refrigeration, building electric and pneumatic controls, water treatment and other mechanical or electrical equipment.
  3. The methods, tools, materials, and equipment used in the operation, maintenance and repair of such equipment.


Ability to:

  1. Follow oral and written directions.
  2. Demonstrate mechanical ability.
  3. Keep accurate records.
  4. Install, operate and make repairs to the various types of equipment listed above in the knowledge requirements.
  5. Make written reports, read, interpret, and work from plans, drawings and specifications.
  6. Lay out work for others and direct them in this work.
  7. Analyze situations accurately and take effective action.

Eligible List Information

A Servicewide Open eligible list for the STATIONARY ENGINEER Classification will be established for:

  • State of California

The names of successful competitors will be merged onto the eligible list(s) in order of final score regardless of test date. Eligibility expires 24 months after it is established. Applicants must then retake the examination to reestablish eligibility.

Resulting Eligibility List(s) will be used to fill vacancies throughout the State of California.

Veterans' Preference will be granted for this examination. Veterans' Preference is an assistance program for veterans, veteran widows and widowers, and spouses of 100% disabled veterans who seek employment with the state. Veterans' Preference is also extended to currently serving military members nearing their retirement or separation date.

You are not eligible for Veteran's Preference if you are:

  • A veteran who has been dishonorably discharged or released.
  • A veteran, widow or widower of a veteran, or spouse of a 100 percent disabled veteran who currently has permanent civil service status. (Permanent civil service status is the status of an employee who is lawfully retained in his/her position after completion of the applicable probationary period. This does not include limited term).

Veterans' Preference is codified in Government Code Sections 18973 – 18979.

Veteran status is verified by the California Department of Human Resources (CalHR). Directions to apply for Veterans' Preference are on the Veterans' Preference Application (Std. Form 1093), which is available at www.CalCareers.ca.gov, and the Department of Veterans Affairs.

Career Credits are not granted for examination(s) administered on an Open basis or a Promotional basis.

Testing Departments

  • State of California

Contact Information

Questions regarding this examination should be directed to:

State of California
CalCareer Service Center
1810 16th Street
Sacramento, CA 95811
Phone: (866) 844-8671
CalCareer@calhr.ca.gov

California Relay Service: 1-800-735-2929 (TTY), 1-800-735-2922 (Voice). TTY is a Telecommunications Device for the Deaf, and is reachable only from phones equipped with a TTY Device.

Equal Opportunity Employer

The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

Drug Free Statement

It is an objective of the State of California to achieve a drug-free State work place. Any applicant for State employment will be expected to behave in accordance with this objective, because the use of illegal drugs is inconsistent with the law of the State, the rules governing civil service, and the special trust placed in public servants.

General Information

Examination and/or Employment Application (STD 678) forms are available at the California Department of Human Resources, local offices of the Employment Development Department, and through your CalCareer Account (www.CalCareers.ca.gov).

If you meet the requirements stated on this examination bulletin, you may take this examination, which is competitive. Possession of the entrance requirements does not assure a place on the eligible list. Your performance in the examination described in this bulletin will be rated against a predetermined job-related rating, and all applicants who pass will be ranked according to their scores.

State of California reserves the right to revise the examination plan to better meet the needs of the service, if the circumstances under which this examination was planned change. Such revision will be in accordance with civil service laws and rules and all applicants will be notified.

General Qualifications: Applicants must possess essential personal qualifications including integrity, initiative, dependability, good judgment, the ability to work cooperatively with others, and a state of health consistent with the ability to perform the assigned duties of the class. A medical examination may be required. In open examinations, investigation may be made of employment records and personal history and fingerprinting may be required.

Eligible Lists: Eligible lists established by competitive examination, regardless of date, must be used in the following order: 1) sub-divisional promotional, 2) departmental promotional, 3) multi-departmental promotional, 4) service-wide promotional, 5) departmental open, 6) open. When there are two lists of the same kind, the older must be used first. Eligible lists will expire in one to four years unless otherwise stated on the bulletin.

High School Equivalence: Equivalence to completion of the 12th grade may be demonstrated in any one of the following ways: 1) passing the General Education Development (GED) Test; 2) completion of 12 semester units of college-level work; 3) certification from the State Department of Education, a local school board, or high school authorities that the competitor is considered to have education equivalent to graduation from high school; or 4) for clerical and accounting classes, substitution of business college work in place of high school on a year-for-year basis.

Accepted applicants must provide proof of identification at each in-person test session. Acceptable identification consists of a photo identification card or two forms of signed identification.

Application Methods:
Electronic (Your CalCareer Account)